The WF101JSYFHLHBV comes with a resolution of 1024×600 pixels. It has a PCB board featuring an HDMI connector that supports an HDMI signal (only for DVI) Interface and has a 40-pin GPIO connector designed to make Raspberry Pi usage easy. The backlight has four studs, and the PCB adopted the locking method attached to the module. The model adopted an IPS panel with a wider viewing angle of Left:85 / Right:85 / Up:85 / Down:85 degrees.
This TFT model is built-in with EK79001HN and EK73215BCGA driver ICs, high brightness of 950 nits.
The module’s ILI2511 touch panel driver IC supports a USB interface and single-touch or multi-touch (option) detection points.
- Supply voltage 4.7~5.3V
- Typical value 5V
- Glare surface glass
- Aspect ratio 16:9
- Contrast ratio 800:1
- Operating at temperatures from -20℃ to +70℃
- Storage temperatures from -30℃ to +80℃.